• 714342-0641
  • Box

714342-0641

Válvula Blow-off Q 6.0 psi (roxo) - Adaptador de aluminio

El modelo Q es la primera revisión de válvula Blow-off de TiAL. Sustituye a las válvulas antiguas directamente sin necesidad de soldaduras. Esta es la válvula Blow-off de más calidad actualmente en el mercado. Se ofrece con una variedad de muelles para los diferentes niveles de vacío y un muelle especial específicamente para los vehículos sobrealimentados.
Preço: 
Preço273,00 €
Sem ICMS se procede
Características técnicas:
  • For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internall components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in ( 50.5 mm ) valve; we believe this is the largest valve available with the highest flow capacity.
  • The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free apearance.
  • The valve seal utilizes a viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anozide-coated for wear resistance.
  • The blow-off valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
  • An aluminum or mild steel weld base mounting flange is furnished with each unit. Stainless steel is available an additional cost. The use of 6061 aluminum allows the housing to be anodized with a selection of colors where most cast aluminum alloys can not be anodized. This allows the individual to match, or coordinate, the engine compartment color scheme.
  • The clamp, valve, and housing will be offered in Silver, Black, Red and Purple to allow you to mix or match the clamp, body, and valve assembly to create a look unique to your application. You may also purchase a plain or unassembled unit to anodize or color-coat as you like.
Informações técnicas: 
Peso: 750 g

Produtos relacionados

722783-0003
722783-0003
Adaptador válvulas Q Blow-off (aço inoxidável)
Preço:
39,00 €
Detalhes
722783-0002
722783-0002
Adaptador válvulas Q Blow-off (Aço)
Preço:
24,00 €
Detalhes
722783-0001
722783-0001
Adaptador válvulas Q Blow-off (aluminio)
Preço:
24,00 €
Detalhes
722785-0001
722785-0001
Anéis borracha para adaptador válvulas Blow-off
Preço:
6,00 €
Detalhes
714344-0000
714344-0000
Grampo para válvulas Blow-off
Preço:
39,00 €
Detalhes
TurboMaster é uma empresa dedicada em exclusiva desde o seu início em 1980 ao mundo do turbocompresor, mais de 35 anos de expêriencia garanteir nossos conhocimientos e serviços que nos pomos sua enteira disposiçao.
Distribuidores das melhores marcas mundiais GARRETT, HOLSET e TIAL.